Updated 12/31/97.

*****
Instructions for Upgrading your Multi!Wav NT Driver installation.

You should already have your Multi!Wav card INSTALLED and OPERATIONAL.
if not, destroy these files and download the Complete NT Driver installation.

Print out this document before installing your Multi!Wav NT Driver.



*****
Upgrading the NT WAV Driver ...



Upgrading Multi!Wav NT Utility ...

To update Multi!Wav NT Utility, please uninstall the program using the Windows
Control Panel Add/Remove Programs feature.  Then, simply reinstall the new version
by running Setup.exe.

You can find the Setup program in the "AdBNTTemp" directory.



*****
Step 1.  Upgrading your Multi!Wav NT WAV Driver...

You must be an administrator to install the NT driver.  Your NT driver must already be
un-installed.

First, you must uninstall the current version of the driver in the typical NT fashion of removing
and audio device from the Multimedia Devices section of the WindowsNT control panel.

HOWEVER, BEFORE YOU UNINSTALL THE DRIVER, WRITE DOWN YOUR CARD ADDRESS, DMA CHANNELS,
I/O FORMAT (PRO/PRO18 Only), AND HARDWARE TYPE (PRO Only).

Then, uninstall your current WAV Driver.  Search your hard drive and remove ALL mwdpro*.lbn files.


Installing the NT Driver is done in the typical NT fashion of adding an audio device
to the Multimedia Devices section of the WindowsNT Control Panel.

Run the Windows Control Panel.  Double click on the Multimedia icon.  Choose the Devices tab.
Click on Add.  Find the OEMSETUP.INF file in the "AdBNTTemp" directory.

A.  Select the Card to Install: (If you have a PRO card, select the appropriate version)
B.  Select a Card Address (Use the Card Address that you wrote down)
C.  (Optional) Select a Multi!Wav OS.  (Note this applies to the Digital PRO18 & Digital PRO24 cards only)
D.  Enable DMA channels (Use the values that you wrote down)

Click Install, then Close.  Restart NT.

FYI:  There are also other settings that can be configured.
The Multi!Wav NT Driver Configuration options are as follows:

INSTALL NEW MULTI!WAV CARD:
To select this feature, click on the appropriate option button and then click OK.
Use this feature to Add a new Multi!Wav card to your system.

CHANGE INSTALLED CARD SETTINGS:
To select this feature, click on the appropriate option button and then click OK.
Use this feature to CHANGE the settings to an installed Multi!Wav card.  If your
card is Verified Operational by the Driver, it will not allow you to change the Card Address.
You can still change DMA channels, and the Multi!Wav OS.

UNINSTALL A MULTI!WAV CARD:
To select this feature, click on the appropriate option button and then click OK.
Select a Card to installed.  The Multi!Wav Card Type will give more detail about
the card you want to uninstall.



*****
Step 2.  Installing Multi!Wav NT Utility...

Double click on the file SETUP.EXE which you can find in the "AdBNTTemp" folder.

Run the Multi!WavNTUtility setup program and install the Multi!Wav NT Utility.
Multi!Wav NT Utility can be ONLY after the driver is successfully installed.

It will allow you to set software features of your Multi!Wav card, such as
Monitor Input Source, Sync Playback to External Clock, Use Optical Input, etc ...


*****
Step 3.  Installing BitWav32...

BitWav32 is a WAV file record/playback utility with Multi!Wav diagnostics.
With BitWav32, you can also run multiple instances of the program.
Currently, there is no setup routine for BitWav32.  Either copy it to your desktop,
or put it in a directory and create a shortcut pointing to the program.
In order to use BitWav32, the Multi!Wav Driver be installed.


**********
End of Document